La Cornue Loge Hood Repair in San Francisco

Loge is part of the CornuFé hood line, available in 36 and 44 inch widths. Where other pages about hoods begin with the fan, this one begins with the install, because a custom kitchen often hides the real cause behind panelling.

Duct, damper and cap

A hood is only as good as its path outdoors. Kinks, long horizontal stretches, a flattened flexible section or a damper that sticks all cut airflow. In a San Francisco apartment building the route may be shared or bent around structure; in a Marin hillside house it may be long and steep. We confirm the path before touching the hood itself.

Power supply

The hood needs a dependable supply. During remodels, the feed is sometimes moved, shared with other loads or tucked behind a new cabinet. Intermittent running, a hood that dies when another appliance starts, or one that failed the week the kitchen was finished are signals to look at the circuit.

Make-up air

Tight modern houses and strong hoods do not always get along. If the hood seems to labour, doors slam, or a flue elsewhere draws backward, the room may lack make-up air. This is a conversation between you, your contractor and us; we can describe what we see, and the building side is for your contractor to decide.

The hood and the range together

Because the Loge sits above a range, heat, grease and moisture reach it daily. A hood over a gas range also meets combustion moisture. If your range is a La Cornue, see La Cornue range repair and the installation checks article, since both fit together.

Safe things to do first

1. Wash filters and dry them.
2. Confirm the breaker is on and the switch is set.
3. Look for the model plate, usually visible behind the filters.
4. Leave housings and wiring alone.

Sparks or a burning smell: breaker off and keep it off.

Booking

The service page is La Cornue range hood repair, and the lineup is at La Cornue range hoods. For a hood of similar width see the Cascade hood. We diagnose, estimate in writing and repair only when you approve.

Why the model plate helps

Hood parts differ from model to model, and the Loge is no exception. Having the plate in a photograph lets us prepare for the likely failures before arriving, which keeps the visit focused on your hood.

Frequently asked questions